Driveshaft Description
This is a “double universal joint” CV Olivers driveshaft (only applicable to Sye), which applies to TJ herders (not Rubicon) with 2-4.5 “suspension elevators. The CV Olivers driveshaft is designed to help prevent the vibration of the drive train after the elevator is installed and reduce the angle of the drive train. Its strength and design are superior to the factory drive shaft. Sye must be used to lift TJ herders. Fit TJ has 2-2.5” elevators. Non Rubicon, non long arm lifting. With factory rear differential.
- Greaseable Spicer 1310 U-Joints
- New Transfer Case CV Yoke –MUST USE RTV ON THE T-CASE SPLINES TO PREVENT LEAKING.
- Grade 8 Mounting hardware
- New Dana 30/44 Pinion Yoke
- 1310 U-Bolts
- High-Speed Balanced.
- Ready to be installed in your JK 2 Door.
- Made of 2″ .120 wall DOM tubing.
- Long Travel Slip and Stub Used.
What is the drive shaft？
The drive shaft is a rotating body with high speed and few supports, so its dynamic balance is essential. Generally, the drive shaft shall be subject to a dynamic balancing test before delivery and adjusted on the balancing machine. For front engine rear wheel drive vehicles, the shaft transmits the transmission’s rotation to the main reducer. It can be several joints, and the joints can be connected by universal joints.
主要使用专用车辆的驱动轴in oil tank trucks, fuel trucks, sprinkler trucks, sewage suction trucks, manure suction trucks, fire trucks, high-pressure cleaning trucks, road obstacle removal vehicles, aerial work vehicles, and garbage trucks, and other vehicles.
Application of driveshaft
The transmission shaft is an integral part of the power transmission of the automobile. Its function is to transmit the engine’s power to the wheels together with the gearbox and the drive axle to generate the driving force of the automobile.
The transmission shaft of special vehicles is mainly used in oil tank trucks, fuel trucks, sprinkler trucks, sewage suction trucks, manure suction trucks, fire trucks, high-pressure cleaning trucks, road obstacle removal vehicles, aerial work vehicles, and garbage trucks, and other vehicles.
How do I know if my drive shaft is broken?
Damage or failure of the drive shaft can make the vehicle difficult to control. Read on to learn which signs and symptoms you should pay attention to. If any of the above conditions occur in your car, please go to your mechanic; They have expertise in diagnosing and repairing propeller shaft problems.
Vibration under the vehicle
A common symptom of a drive shaft fault is a violent vibration from under the vehicle. Worn universal joints, couplings, or carrier bearings may cause driveshaft vibration. Failure to repair these components may cause further damage to other driveline components.
Difficult turning
If you have difficulty turning, this may be a U-joint problem. A faulty universal joint may hinder the regular rotation of the wheels, making it difficult to control the vehicle.
Heavy noise
If you hear a loud click when shifting gears, this is another sign of damage to the drive shaft. The possible culprit is a worn U-shaped joint.
The car vibrates when accelerating.
Shaking when accelerating from a stop or low speed may be caused by a loose universal joint or poor bracket bearing.
Creak
Not only is it annoying, but the squeaking noise at low speed may also be caused by the universal joint that needs lubrication. A small amount of grease can eliminate the noise if the U-joint shows no signs of excessive wear.
Click or knock
This may indicate wear or failure of the CV joint. Get your mechanic to repair it.
Related products
- Internal Yoke- There are two located at both ends of the PTO shaft -tractor and implement. This is welded to the drive end.
- Universal Joint-There are two at both ends of the PTO shaft.
- External Yoke- There are two at both ends of the PTO shaft. It has a “Y” shape to connect to the U-joint and a female hole.
- Safety Chains-The chains secure the PTO shaft onto the equipment and the tractor.
- Safety Shield- These cones are found on both ends.
 |
 |
 |
 |
| Tractor Yoke | Cross & Bearing Kit | Shaft | Shaft Weld Yoke |
 |
 |
 |
 |
| Slip Sleeve | Tube | Tube Weld Yoke | Implement Yoke |
 |
 |
 |
 |
| Yoke & Shaft Assembly | Yoke & Tube Assembly | Drivelines | Guard & Guard Bearing |
Driveshaft manufacturer
Ever power has always been your one-stop car line store, with more than 30 years of comprehensive experience, which we are proud of. We focus on drive shafts and differentials. Almost all brands and models of cars, trucks, and tractor PTO shaft drive shafts.
For more than 50 years, we have been manufacturing, installing, repairing, and customizing drive shafts. Our ever power believes in high-end drive shafts, and there is no high-end price. Most drive shafts are manufactured in just a few days and shipped at a breakneck speed. We are proud to build all drive shafts in our home! So take a minute to browse our website：https://www.ever-power。net/pto-drive-shaft/. Look around and see all the services we provide, all the parts we stock, and even the customer’s evaluation of us. If you can’t find the answer you want here, please don’t hesitate to contact us or come to our store anytime. Our customer service is free. We look forward to hearing from you soon.