90 Degree Gearbox

Right Angle Gearbox Selection Process

There is a standard process that should be considered before selecting the 90-degree spiral bevel gearbox that is correct for your specific application.

确定您的首选输入/输出比 - 标准比率为1：1和2：1。It is also possible to use a step-up ratio of 1:2 by using shaft #2 as the input shaft.

Designate which shafts are to be the input and output shafts – This step is especially important in making sure that no shaft will turn faster than 2,000 RPM. If shaft #2 in the 2:1 ratio models is selected as the input shaft, it can turn at a maximum of 1000 RPM. In the 1:1 ratio models it makes no difference. However, the choice, in either case, will affect your mounting.

Designated output shaft - The designated output shaft(s) must have a torque capacity greater than your application load. Review catalog for torque ratings.

选择驱动器类型 - 选择2条或3向配置。

Select the correct model number – Select the correct model number that corresponds with your chosen drive type.

轴和外壳的修改 - 如果需要修改轴和/或外壳，请与我们联系，并与我们联系。

Right Angle Gearbox Options

We carry three unique varieties of 90° reducers to service all types of applications. Our miter gearbox options include the following:

Two-Way Right Angle Gearbox

我们不断动力的双向斜切变速箱使用专门设计的螺旋斜角齿轮平稳而安静地传输动力，这些螺旋斜角齿轮将耐腐蚀的不锈钢轴转动。我们的双向直角变速箱具有AGMA 10级螺旋斜角齿轮。

Three-Way Right Angle Gearbox

These 90-degree gearboxes are permanently lubricated and provide a smooth transfer of power with very little noise and no maintenance. Our three-way right angle gearboxes feature two output shafts manufactured from non-magnetic stainless steel and AGMA class 10 spiral bevel gears.

反向旋转变速箱

不断功能的反向旋转变速箱以1：1和2：1的齿轮比提供反旋转的“ T风格”配置，并具有许多轴尺寸选项。这个独特的直角变速箱提供了两个输出轴，它们同时朝相反的方向旋转。我们的反向旋转直角变速箱具有耐腐蚀的不锈钢轴和无维护操作以及AGMA 10级螺旋斜角齿轮。